Unable to parse FCP XML

James - The xml was never edited manually. All clips were replaced in the timeline in FCPX and a new XML was generated.

Update - After removing all 48khz audio issues I was able to get around the last error (Calculating Boxing...) I sent you by reimporting the new xml back into FCPX (into a new library) and re-exporting a new xml. Then, X2Pro was happy.

Moving forward ... I have two questions:

1) I was able to produce an AAF file for the project which was about 3.4GB in size. Does this AAF contain all the audio media or do I also need to send to post-audio a copy of the original raw media from FCPX?

2) My "Project" timeline (from which I exported the xml) contains four "compound clips" that make up Acts 1, 2 , 3 and 4. - Will an export of an xml from this project give my post-audio what they need to do a mix or do I need to have the inner workings of the compound clips all on one project timeline --- un-compounded? I am not sure how x2pro will handle the compound clips.

Thanks for helping us through this process.

Best,

Barrett Sanders

Dear Sanders,

How did you remove the clips ? If they were deleted out of the XML manually then this explains why the FCPXML is corrupt. They would need to be replaced in the timeline in FCPX and a new XML generated.

Please advise

Yours Sincerely

James

Dear Sanders,

If I try to import that XML back into FCPX it crashes FCPX, I am using OS 10.13 and FCPX 10.3.9, can you import this XML back into your FCP ?

Please advise.

Yours sincerely

James

James - Thinking through the process you outlined -- I went through the xml and found all instances of the 48009. ... and replaced the movies using compressor and relinking. I produced a new xml and the audio rate error is gone however we now have a new one - see below.

I am starting to have concerns about getting this to work? Anyway we can take this to a another level of support?

Sincerely,

Barett Sanders

Unable to parse FCP XML file to obtain project information

Details:
Calculating Boxing
Extracting Audio
Extracting audio
Getting retiming from time map
Processing element ClipElement
Processing element MarkerElement
Processing element ProjectElement
Processing element RefClipElement
Processing element SequenceElement
Processing element SpineElement
Processing marker element
Trying to get retiming with 0 duration.

Suggestions:
- Ensure that the file is not locked by another application and is readable;
- Ensure that this is a valid FCP XML file from a released version of FCP X;
- Ensure that this is the export of a Project, not of a Library or Event;
- Ensure that this is not an empty project (or that all audio is disabled);

X2Pro Audio Convert 4.0.32

Recompressed and Removed/Relinked the two files - Still getting the error:

Unable to parse FCP XML file to obtain project information

Details:
Extracting Audio
Getting audioRate attribute
Int attribute had value of [48009.1]
Parsing FCP XML
Parsing FCP XML document
Parsing asset element

Suggestions:
- Ensure that the file is not locked by another application and is readable;
- Ensure that this is a valid FCP XML file from a released version of FCP X;
- Ensure that this is the export of a Project, not of a Library or Event;
- Ensure that this is not an empty project (or that all audio is disabled);

X2Pro Audio Convert 4.0.32

Dear Sanders,

There are two clips with a sample rate of 48009.2, can you do the honours with the following two clips as well please.


asset id="r578" name="Viggo Wild Horse 2" uid="2887DF10FD2C40323600359651BD4971" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2005-01-14/Viggo%20Wild%20Horse%202.mov"

asset id="r573" name="Dan Flores History of H tk 1 1-12" uid="2079944E354704E222A97FCD37AA253E" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2015-05-30/Dan%20Flores%20History%20of%20H%20tk%201%201-12.mov"

Yours Sincerely

James

Hi James - First off thank you for your help - We are trying to get to audio post out for two festivals screenings so we are feeling the heat.

I ran the five clips "David O RoundupVideo" through COMPRESSOR and replaced them in the timeline. I also ran a test to see if compressor would solve the problem --- by creating a new timeline and dropping the old and new clip into the timeline and then exporting and testing the xmls in X2Pro. Compressor was fixing the the problem. xmls with the new clip were readable by x2pro.

HOWEVER is still receive the error with my timeline:

Unable to parse FCP XML file to obtain project information

Details:
Extracting Audio
Getting audioRate attribute
Int attribute had value of [48009.2]
Parsing FCP XML
Parsing FCP XML document
Parsing asset element

Suggestions:
- Ensure that the file is not locked by another application and is readable;
- Ensure that this is a valid FCP XML file from a released version of FCP X;
- Ensure that this is the export of a Project, not of a Library or Event;
- Ensure that this is not an empty project (or that all audio is disabled);

X2Pro Audio Convert 4.0.32

Dear Sanders,

If you look at the error message we see some media marked in the XML as having 48000.8 hz sample rate. We can accept any whole number but .8 is not something we can cope with (I am surprised FCPX can). There are references to five pieces of assets that have this rate assigned, you might be able to push these clips through compressor or some such to create new clips that have a sample rate of 48000, and add these back into the sequence.

The assets are
asset id="r39" name="David O RoundupVideo-7" uid="7843B7CC23E912690EAB4F016323B1D2" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2015-05-30/David%20O%20RoundupVideo-7.mov"

asset id="r45" name="David O RoundupVideo" uid="A2D4211C13BF76B55F06DDEC03684ADB" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2008-10-06/David%20O%20RoundupVideo.mov"

sset id="r308" name="David O RoundupVideo-10" uid="A5F5AC277AD1A7A58C4DCF13B9BD2C77" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2015-05-30/David%20O%20RoundupVideo-10.mov"

asset id="r308" name="David O RoundupVideo-10" uid="A5F5AC277AD1A7A58C4DCF13B9BD2C77" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2015-05-30/David%20O%20RoundupVideo-10.mov"

asset id="r1165" name="David O RoundupVideo-2" uid="72E9B8536C60F588ACBC62E7307576EB" src="file:///Volumes/MyBigNewRaid/FCPX%20FILES%20Kleinert/Raw%20Media/Final%20Cut%20Original%20Media/2015-05-30/David%20O%20RoundupVideo-2.mov"

May we ask how the media in question was created ?

Please advise.

Yours sincerley

James

Hi James, I was able to go through the entire show (two-hours) and export (Master/ProRes files) and replace them - all shots with "Tweetie Int. ...". I then tried to open a new XML file and got the same error message - below.

Any help would be greatly appreciated!

Best,
Barrett

Unable to parse FCP XML file to obtain project information

Details:
Extracting Audio
Getting audioRate attribute
Int attribute had value of [48000.8]
Parsing FCP XML
Parsing FCP XML document
Parsing asset element

Suggestions:
- Ensure that the file is not locked by another application and is readable;
- Ensure that this is a valid FCP XML file from a released version of FCP X;
- Ensure that this is the export of a Project, not of a Library or Event;
- Ensure that this is not an empty project (or that all audio is disabled);

X2Pro Audio Convert 4.0.32

Thank you for your attention to this matter! We'll work to remove the clip and try to export again.

All the best,

Barrett Sanders

Dear Sanders,

The issue is in line 1580 on the XML, if you try to re-import this back into FCPX you will get an error. As such the XML itself is corrupt. Line 1580 refers to an instance of a clip called "Tweetie Int. 1-1.mov", if possible you might want to remove this clip from your timeline, see if it can be exported (and then imported back in FCPX) if it can then you might want to try to add this clip again and see whether FCPX will be happy and create a valid XML a second time.

Yours Sincerely

James

I just purchased- I am trying to move audio to post and my xml file is producing the following error: Unable to parse FCP XML file to obtain project information.

Any help and direction would be greatly appreciated.
xml attached


Unable to parse FCP XML file to obtain project information

Details:
Extracting Audio
Getting audioRate attribute
Int attribute had value of [48000.8]
Parsing FCP XML
Parsing FCP XML document
Parsing asset element

Suggestions:
- Ensure that the file is not locked by another application and is readable;
- Ensure that this is a valid FCP XML file from a released version of FCP X;
- Ensure that this is the export of a Project, not of a Library or Event;
- Ensure that this is not an empty project (or that all audio is disabled);

X2Pro Audio Convert 4.0.32

Jeremy,
Thanks so much. That worked :)
You are a wizard, thank you :)
Peace & good conversions,
Jake

Jake,

I moved your post to a new topic as it was a different cause than the previous topic error.

You FCPXML appears to be of the FCP Library and not the actual Project that you are wanting to create the AAF for.
If you can be sure to highlight the Project file before clicking on the File--> Export XML button, that should get you past this problem you are seeing.

Give that a go and let us know how you get along.

Hi Jeremy,
I just purchased X2Pro after meeting with my sound mixer. the first time I ever tried to use it I received the message saying "Unable to parse FCP XML File". I would be very grateful if you would take a look at my XML and let me know what is going on. I have a tight deadline for festival submissions and a small window for working with my sound mixer. Your help would be helping out many people involved in a passion project. Thanks so much for your time.
Sincerely,
Jake