Final Cut to AAF issues.

Shane,

I just wanted to follow up with you and see if you were still having any issues with X2Pro or everything was working ok with your other projects.
If you still have issues, I would like to see if we could get the Mac Console log from you for with the conversion details.

Can you please also send the mp3 file that X2Pro doesn't like via WeTransfer?

It is called "Stupid Again (rough cut).mp3" and is on a drive called "STTM 5", in the folder "Final Cut Original Media/2015-11-06/"

Shane,

Thank you for providing us with your XML.
Would you be able to provide the Mac console log details from your attempted conversion?

It may be easiest to open Console, clear the window, then try to run the conversion in X2Pro and copy out the lines of the console for the conversion and put those into a text file and send to us.

Many thanks for your help.

I sent it there via WeTransfer it should be there by now

Please send it to This email address is being protected from spambots. You need JavaScript enabled to view it.

it says its too large to attach here, is there an email i can send it too via yousentit or drop box?

Can you please attach your fcpxml?

I tried to export my whole project again and i got this error. anything else i can try?

Writing AAF file
Adding assets to AAF file
Adding essence for asset [Stupid Again (rough cut)] to AAF file
Adding essence data to AAF file for portion 0 of asset [Stupid Again (rough cut)]
Adding audio data to AAF file
Adding Sample Data
Creating Essence Data Objects

Error code: 0x80000004

No AAF file has been generated.
X2Pro Audio Convert LE 3.0.5

X2Pro 3.0.5 is now available, so please try converting your large project in that and tell us how that goes.

Conform effects happen automatically when you put a clip into a project with a mismatched (but very close) frame rate. For example a 24fps clip in a 25fps project or vice-versa. FCP doesn't tell you that it's is going to conform the clip, but it does it anyway. The clip's speed will be changed so that 1 frame of the clip lasts as long as 1 frame of the sequence. This results in the clip being slowed down or sped up by about 4%

X2Pro doesn't support retimed audio. It will put the clip in the AAF at the right location, but the sound will go out of sync with the video. These warnings that you are seeing are so that you know where to look if it needs fixing in the DAW

OK! so i decided to brake up my 20 min project in to 4 parts to see if i could narrow down the issue to a place in my project. funny enough i was able to convert 4 smaller fcpxml to the AAF files without the error. When i tried to go back and do the whole thing again i got that same error message and the AAF was not generated so maybe it has to do with the length of the project? I did get the message below for a lot of stuff, but it still made the AAF file. (I don't know how this error effects my project or putting it in to protools so if some one could tell me what it means, and if im still screwed that would be great. thanks.

(This is only a sample) i had lots more of the same message with different times.
• Conform rates are not supported. The Conform rate at 00:03:58.75 has been ignored.
• Conform rates are not supported. The Conform rate at 00:01:53.63 has been ignored.
• Conform rates are not supported. The Conform rate at 00:04:09.92 has been ignored.
• Conform rates are not supported. The Conform rate at 00:04:04.00 has been ignored.
• Conform rates are not supported. The Conform rate at 00:01:32.29 has been ignored.
• Conform rates are not supported. The Conform rate at 00:04:26.33 has been ignored.
• Conform rates are not supported. The Conform rate at 00:04:50.92 has been ignored.
• Conform rates are not supported. The Conform rate at 00:03:02.04 has been ignored.

X2Pro Audio Convert LE 3.0.4

I believe im having the same issue as many others wondered if there was something i should do. a pop up came up when i reopened the program and said make a comment here.

as most im on a dead line so would love some help if possible.

below is the text i got. i have also attached the txt file below that was generated.

I am using FCP X

I am using the light version of your program so i have not trimmed anything (if i need to get the pro version let me know)

OS 10.11

it FCPXML file is to large to attache here so please let me know if you need it some other way.


Writing AAF file
Adding assets to AAF file
Adding essence for asset [10BT01_3] to AAF file
Adding essence data to AAF file for portion 0 of asset [10BT01_3]
Adding audio data to AAF file
Adding Sample Data
Creating Essence Data Objects

Error code: 0x80000004

No AAF file has been generated.
X2Pro Audio Convert LE 3.0.4