Track number exceeds number of tracks in asset -- how to fix?

Hi Filmyak

Glad all is well, apologies for the late response I have only just come back from my holidays.

Yours Sincerely

James

Fixed! Thank you, James!

Ha, I totally forgot we'd had this exact conversation before! Yeah this is another episode from the same source material as the other link. On the plus side, it's the very last episode with this footage, so once I get this fixed, it's done for good!

Gonna give it a shot on my end... will report back...

Hi Filmyak,

The issue is that the XML says the asset has only one track but later on will reference two tracks. We would need the FCPXM to confirm.

It would be possible to manually modify the FCPXML to say it has two instead of one track in the asset section, we can do this if you do not feel confident.

Or you can process the FCPXMLwith a little fixer up programme.

Please see forum.marquisbroadcast.com/12-x2pro-professional/1685-fatal-error-converting-to-protools.html#6568

Yours Sincerely

James

Any suggestions on how to fix this error message? Trying to embed an AAF for the mixer. Thanks!

The following fatal errors were found:
Processing element ProjectElement
Processing Audio element
Processing element AudioElement
Extracting audio
Extracting Audio
Processing element SequenceElement
Track number [2] exceeds number of tracks [1] in asset [A010_C004_0101O0] [r33]
Processing element SpineElement
Processing element ClipElement
Processing element GapElement

No AAF file has been generated.
X2Pro Audio Convert 4.5.6